How do I add a mydlink-enabled device to my account if it's currently registered to another account?
If your device is registered with another mydlink account, you will need to remove it from the account it is currently registered with, or you will need to hard reset your device back to the factory default settings. After doing this, you will be able to register the device to your mydlink account.
To remove a device from a mydlink account:
1. Sign in to the mydlink account the device is registered to.
2. Select your device, then go to its Settings page and click the Remove Device button.
To hard reset a device back to the factory default settings:
1. Make sure your device is plugged in and powered on, then use an unfolded paperclip to press and hold the RESET button for at least 20 seconds.
2. Wait about 60 seconds for the device to reboot.
Podobné témata:
- Active X fails to install during my mydlink camera setup Přečtěte si odpověď
- Error Unable to connect to mydlink website during Setup Wizard Přečtěte si odpověď
- How do I add a mydlink-enabled device to my account if it's currently registered to another account? Přečtěte si odpověď
- How do I connect my camera wirelessly using Wi-Fi Protected Setup(WPS)? Přečtěte si odpověď
- How do I set up a mydlink-enabled Cloud Camera? Přečtěte si odpověď
- How to add 2nd camera to the same mydlink account? Přečtěte si odpověď
- I'm using the Setup Wizard for my camera, but it won't let me save the camera's password. Přečtěte si odpověď
- I'm getting error Cannot find Camera during my Mydlink camera setup Přečtěte si odpověď
- I'm getting error Unable to add this device to your mydlink account during my mydlink camera setup Přečtěte si odpověď
- What should I do if I can NOT set the device password Přečtěte si odpověď
- What should I do if I forget my mydlink-enabled products device password Přečtěte si odpověď
- What should I do if the setup wizard can't find my device? Přečtěte si odpověď